After-sales Service: | on-Site Installation, Commissioning and Training |
---|---|
Warranty: | 12 Months After Acceptance |
Condition: | New |
Certification: | CE, ISO 9001: 2015 |
Automation: | Automatic |
Suitable for: | Alloy, Sapphire, Quartz Crystal, Silicon, Magnets |
Customization: |
---|
Suppliers with verified business licenses
CA4040 Multi-wire Saw
>Double Workstation
The machine adopts double-station design and is able to cut two plates materials at the same time.
>Easy Operation
Roller cutting system, workbench, tension system, take-up and pay-off and wire winding system are set in a plane for easy operation.
>Swing Cutting
The cutting force is stronger with the worktable swing design. Double worktable has an independent servo control system and can run independently.
>Flexible Wire Winding Mode
The rollers quantity can be flexibly changed between 3 and 5 to achieve cutting for products in different sizes.
>Stable Running
Five-roller direct drive structure leads to stable operation of the equipment.
>Wire Break Memory System
Detail | Parameter |
Model | CA4040 |
Maximum work size | 400x250x400mm |
Slice thickness | 5-60mm(wire winding number ≤50) |
Workbench qty | 2 |
Roller out diameter *Workable width | (φ180±10mm)*260mm*5 |
Wire diameter | φ0.20mm-φ0.37mm |
Wire Spool Storage | 40km(φ0.25mm) |
Maximum running speed | 1000m/min |
Travel of workbench lifting | 422mm |
Workbench swing | ±7.5° |
Cutting method | Vertically upward movement |
Cutting feed speed | 0.1-99.9mm/min |
Cutting fluid | Water--based cutting fluid or cutting Oil |
Fluid storage | 800L |
Fluid flow rate | 200L/min |
Power Supply | Three-phase 380V 50Hz |
Rated power | 42kw |
Air supply | ≥ 0.4MPa. |
SizeL*W*H | 3000mm*2200mm*2820mm |
Weight | 5000Kg |
1. What Materials Could The Multi-Wire Saws Cut?
Our multi-wire saws can cut all kinds of hard and brittle materials such as Sapphire, Quartz Crystal, Optical Glass, Magnets, Ceramics, Silicon Wafers, Silicon Carbide, Precious Metal, etc.
2. What's The Size Range Of The Cut Product?
The maximum diameter of the cut material is up to 1000mm.
The minimum thickness of the wafers after cutting is 0.1mm.
3. What's The Cut Accuracy Of Multi-Wire Saws?
±10μm. It's subject to the cut material, please consult us for actual data.
4. Which Countries The Equipments Have Been Exported To?
The USA, UK, Russia, Japan, Brazil, Korea, India, Singapore, Taiwan of CHINA.
Suppliers with verified business licenses